LED Street Light

An LED street light is an integrated light that uses light emitting diodes (LED) as its light source. New in manufacturing, the LED light cluster is sealed on a panel and then assembled to the LED panel with a heat sink to become an integrated lighting fixture.

Technical Specifications

DESCRIPTION SPECIFICATIONS
Product Code SSLC-12to 90W
Product Description Street Light
Input Supply 90-264V AC
Total Input Power 12 watt to 90 watt
Power Factor > 0.95
Lumen Output > 2200 Lumen *
Ingress Protection (IP) IP 65
CCT (Correlated Color Temperature) 6000k
Dimension 360*175*75mm*
Replacement Of 70W Metal halide / 70W HPSV*


Advantages

  • Low energy consumption: Many LED lighting retrofits have been claimed to dramatically reduce energy use, but in actual case studies lower energy use is limited and tied to reduced illumination levels
  • Long and predictable lifetime: The projected lifetime of LED street lights is usually 10 to 15 years, two to four times the life of currently prevalent HPS. (LEDs themselves do not generally fail or "burn out" in a way comparable to other technologies, and barring catastrophic failure of other mechanical or electronic components of the LED fixture, lifetimes are typically set by a decrease in luminous output of 30%. But the functional lifetime of an LED fixture is limited by the weakest link; associated drive electronics are typically projected to last about 50,000 hrs. It is important to understand that no LED streetlighting products have been in service long enough to confirm the projections). If realized in practice, the less frequent need to service or replace LEDs will mean lower maintenance cost.
  • More accurate color rendering: The color rendering index is the ability of a light source to correctly reproduce the colors of the objects in comparison to an ideal light source. Improved color rendering makes it easier for drivers to recognize potential road hazards
  • Quick turn on and off: Unlike fluorescent and high-intensity discharge (HID) lamps, such as mercury vapor, metal halide, and sodium vapor lamps, which take time to heat up once switched on, LEDs come on with full brightness instantly.
  • No problem with immediate restart: Unlike mercury vapor, metal halide and sodium vapor lamps (commonly used in street lighting), LEDs do not have a problem restarting immediately (hot ignition) following a brief power failure or inadvertent turn off.
  • RoHS compliance: LEDs don't contain mercury or lead, and don't release poisonous gases if damaged.
  • Less attractive to nocturnal insects: Nocturnal insects are attracted to ultraviolet light emitted by many conventional light sources.
  • Optically efficient lighting equipment: Other types of street lights use a reflector to capture the light emitted upwards from the lamp. Even under the best of conditions, the reflector absorbs some of the light. Also for fluorescent lamps and other lamps with phosphor coated bulbs, the bulb itself absorbs some of the light directed back down by the reflector. The glass cover, called a refractor, helps project the light down on the street in a desired pattern but some light is wasted by being directed up to the sky (light pollution). LED lamp assemblies (panels) do not require reflectors and can be designed to provide the desired coverage without a refractor.
  • Reduced glare: Directing the light downward onto the roadway reduces the amount of light that is directed into driver's eyes.
  • • Higher light output even at low temperatures: While fluorescent lights are comparably energy efficient, on average they tend to have lesser light output at winter temperatures.